It is essential to bear in mind a safety if you are trying on getting the tools out at this weekend to perform some home improvements or even only some much-required repairs around the house.

A lot of accidents take place in the house compared to any other places and working with tools, going up and down ladders and uplifting heavy objects can greatly escalate the risk of suffering an injury. So, here some DIY do’s and don’ts from AIG to help you avoid a DIY disaster.

1. Do Put on Protective Clothing

Before you begin any project, be sure you are suitably dressed up. Put on preventive clothing which is appropriate for the job and make sure to cover as much skin as you possibly can.

Put on a pair of preventive gloves and boots and do not wear jewelry or baggy clothing that could become hooked or tangled in tools. Put on a respirator or dust mask to shield your lungs if you are working with some chemicals or in a dusty area.

2. Do Follow Guidelines

It is advisable for you always to read and follow any guidelines included within items you are using. You have to carefully read the safety information and keep for future use if you are using tools that you do not know.

Be sure to follow the recommended safety preventive measure and get familiar with what you should do in case of an emergency when you work with chemicals.

3. Do Use the Right Tools

Make sure that you can access all the important tools for the job when you plan your project. Only use tools in compliance with the manufacturer’s instructions when you use tools for a function other than they were designed for is likely perilous.

Be sure that power tools are in good condition, and the electrical cables are not damaged or tangled before you switch them on. Any tools that are in poor condition have to be removed and replaced.

4. Do Rehearse Ladder Safety

Use only a ladder for light tasks that can be finished rather quickly. Be sure always to put the ladder on a steady and level base. Put the ladder at an angle following the rule of 4 to 1 rule if putting it against a wall; one foot from the wall for each four feet the ladder rises. Use a ladder that is quite high to conveniently complete the job and never overextend or stand astride the ladder.

5. Do Carry Safety Equipment

DIY will be a whole lot safer if you stock up on some basic safety equipment. Just in case you do suffer an injury, you need to always have a fully stocked first aid kit at your house.

Also, you need to ensure that you possess a fire blanket and working fire extinguisher within easy reach to avoid the risk of fire. When there is a risk of flying particles or debris, wear protective eyewear like goggles and use hearing protection like earmuffs or earplugs when working in noisy environments.

6. Don’t Play Around with Electricity

Don’t you ever underestimate the power of electricity because the electrical current in your home is powerful enough to kill you. Be sure to place any cables or wiring prior to drilling holes in a wall. A cable detector in good quality can help with this.

Shut off the power from the mains before you do any work close to electrical wiring or power supplies. Finally, if you are not sure about anything, search for the advice of a qualified electrician and don’t you ever try to make any electrical fixing up yourself.

7. Don’t Take Shortcuts

Try to roughly calculate how long it will take to finish as accurately as possible before starting any project. If you do not have time left and there are still some works to be done, object to the urge to rush.

You are much more likely to create a mistake or get an accident when you are in a hurry through work. Instead, when you have some more free time, pack up your tools and complete the work.

8. Don’t Forget to Put Things in Order

Be sure to manage all workspaces clean and free from mess because a tidy work condition is a safe work environment. Do not leave tools or other items situated on the floor because they can cause a tripping risk.

Clean up the spill instantly to diminish the risk of a slip if you make one. Never put any bulky objects on an unstable base or over the head level because this can lead to a falling object risk.

9. Don’t Think of DIY

Get the help of a qualified professional if you are not sure about the job, especially, if the material you are going to deal with contains dangerous material such as asbestos. Don’t try to do some jobs that you are unfamiliar with just to save some money. Any work that deals with asbestos such as asbestos testing in Adelaide is not recommended to be performed by an unskilled individual.

Hiring a professional is strongly recommended although it will add some costs to the budget. A mishandled job will not only be much costly for a professional to fix, but it can also cost you to lose your life.

Thinking about a home project? You should picture in your mind what you want to accomplish. Try to see what the room or area will look like, and then think about how you can accomplish it. These suggestions will help you achieve your new look painlessly.

To make a room feel more tranquil, use cool, pale shades of purple, green or blue. Utilize fabrics such as cotton or linen and not dark patterns and heavy brocades. Put some potpourri atop the coffee table and have scented candles to create a tranquil heaven for yourself.

When starting to redo your bathroom or kitchen you have to ensure your water valve is off, so you do not flood the room! That seems like it might be obvious, but many people forget that step and end up having a big flood that requires even more renovation.

The lowest price may not be the best deal when it comes to building contractors. It might be tempting, but some people quote low prices to secure a job, and once they have it start raising prices. Others will do a poor job if you don’t pay well. Researching the work which needs to be done and using that information to hire a contractor is your best bet.

When you are taping sheetrock, make sure you have a stainless steel taping knife. This kind of high-quality taping knife is easier to clean up, and it will last for more jobs in the future. It will never be necessary for you to purchase another taping knife if you purchase one that is made of stainless steel, and you maintain and store it correctly.

Hose down your home on the outside using a pressure washer and detergents made specifically for your siding. Pressure washers are wonderful tools to clean the exterior of your home and are easily rented for a nominal fee. Use caution when cleaning near windows and roof lines. Loosening items could lead to an expensive repair job.

Paint stripes on your old walls before installing panels. This will ensure that any small gaps don’t become glaringly obvious. Be sure to measure the panelling before you install it. Paint the walls at these joins with a color that matches your panelling.

Make a budget, and include every detail you can. Surprise cost overruns can easily creep up, and a single error can sink your budget. You can stop this from happening by doing a lot of planning. This will help you stay flexible if something goes wrong, such as a key material not being in stock.

Before purchasing or hanging blinds, measure the area thoroughly. If the blinds aren’t the right size, you won’t be able to use them. Not only do blinds come in a wide variety of different widths, but they are installed in different ways. In some cases, you may need to know the interior width of the window frame, while other designs may mount outside of it.

A specific goal and right planning are required to complete your home remodeling project. The tips laid out here give you a good foundation to make sure all areas of your projects are considered and expected. With prudent planning, your next home improvement project is sure to be a great success.

Typically the water damage that occurs inside of your home could have been avoided if you had followed a few steps to prevent the damage before it happened.

It’s not unusual to hear this claim from a water damage team expert. Below are ten simple tips that will help in avoiding thousands of dollars in unnecessary water damage cleanup expenses.

1. Every once in a while check beneath all sinks in your house to see if there are any pipe leaks. Also, play close attention to slow-draining pipes as they may have blockages.

In addition to these checks, it wouldn’t hurt to re-caulk around sinks that appear old and/or may have begun deteriorating.

2. You can check for water leaks by monitoring your water meter while all the faucets and water using appliances in your home are in the off position.

For about an hour, check the meter in 4-5 minute intervals to see if there are any changes. Any water usage during this time may mean you have a pipe leak.

3. Give your self-easy access to the “MAIN” water shut-off valve in your house. By being able to stop the flow of water in an emergency quickly, you can often save yourself from further damage.

4. If your bathroom floor is tiled, make sure there aren’t any cracks and/or missing areas of grout. To minimize the effect of water damage in this area, ensure that all grout is intact and sealed.

5. If your refrigerator has a built in ice-maker or water dispenser, periodically check the connecting hose for leaks. Any leaks should be taken care of immediately with a replacement hose.

6. The dishwasher causes the common source of water damage in the kitchen. Check the dishwasher for discoloured/warped materials. Also periodically inspect the connecting hose from the dishwasher to the main water line.

7. In your bathroom check the caulking around the bathtubs and toilets. If there are any discolorations, cracks or mold, then you may have some water damage. Be sure to re-caulk any area showing these initial signs of damage.

8. It never hurts to have a working fan in your bathroom. Almost any home improvement store supplies them, and they’re relatively easy to install. These will reduce any moisture and build up of mildew from running hot water.

9. If you have a washing machine in your house, inspect the connector hose every few weeks or so for any signs of damage. Even if there aren’t any problems, the hose should be replaced about every 3-4 years.

10. Air conditions should be serviced by a qualified contractor every couple of years. They will be able “fish-out” obstructions that may cause water damage in around the supporting window.

These tips are not a guarantee water damage will not occur in your home, but following these preventive measures can lessen the chance of it happening.