Home DIY Do’s and Don’ts
It is essential to bear in mind a safety if you are trying on getting the tools out at this weekend to perform some home improvements or even only some much-required repairs around the house.
A lot of accidents take place in the house compared to any other places and working with tools, going up and down ladders and uplifting heavy objects can greatly escalate the risk of suffering an injury. So, here some DIY do’s and don’ts from AIG to help you avoid a DIY disaster.
1. Do Put on Protective Clothing
Before you begin any project, be sure you are suitably dressed up. Put on preventive clothing which is appropriate for the job and make sure to cover as much skin as you possibly can.
Put on a pair of preventive gloves and boots and do not wear jewelry or baggy clothing that could become hooked or tangled in tools. Put on a respirator or dust mask to shield your lungs if you are working with some chemicals or in a dusty area.
2. Do Follow Guidelines
It is advisable for you always to read and follow any guidelines included within items you are using. You have to carefully read the safety information and keep for future use if you are using tools that you do not know.
Be sure to follow the recommended safety preventive measure and get familiar with what you should do in case of an emergency when you work with chemicals.
3. Do Use the Right Tools
Make sure that you can access all the important tools for the job when you plan your project. Only use tools in compliance with the manufacturer’s instructions when you use tools for a function other than they were designed for is likely perilous.
Be sure that power tools are in good condition, and the electrical cables are not damaged or tangled before you switch them on. Any tools that are in poor condition have to be removed and replaced.
4. Do Rehearse Ladder Safety
Use only a ladder for light tasks that can be finished rather quickly. Be sure always to put the ladder on a steady and level base. Put the ladder at an angle following the rule of 4 to 1 rule if putting it against a wall; one foot from the wall for each four feet the ladder rises. Use a ladder that is quite high to conveniently complete the job and never overextend or stand astride the ladder.
5. Do Carry Safety Equipment
DIY will be a whole lot safer if you stock up on some basic safety equipment. Just in case you do suffer an injury, you need to always have a fully stocked first aid kit at your house.
Also, you need to ensure that you possess a fire blanket and working fire extinguisher within easy reach to avoid the risk of fire. When there is a risk of flying particles or debris, wear protective eyewear like goggles and use hearing protection like earmuffs or earplugs when working in noisy environments.
6. Don’t Play Around with Electricity
Don’t you ever underestimate the power of electricity because the electrical current in your home is powerful enough to kill you. Be sure to place any cables or wiring prior to drilling holes in a wall. A cable detector in good quality can help with this.
Shut off the power from the mains before you do any work close to electrical wiring or power supplies. Finally, if you are not sure about anything, search for the advice of a qualified electrician and don’t you ever try to make any electrical fixing up yourself.
7. Don’t Take Shortcuts
Try to roughly calculate how long it will take to finish as accurately as possible before starting any project. If you do not have time left and there are still some works to be done, object to the urge to rush.
You are much more likely to create a mistake or get an accident when you are in a hurry through work. Instead, when you have some more free time, pack up your tools and complete the work.
8. Don’t Forget to Put Things in Order
Be sure to manage all workspaces clean and free from mess because a tidy work condition is a safe work environment. Do not leave tools or other items situated on the floor because they can cause a tripping risk.
Clean up the spill instantly to diminish the risk of a slip if you make one. Never put any bulky objects on an unstable base or over the head level because this can lead to a falling object risk.
9. Don’t Think of DIY
Get the help of a qualified professional if you are not sure about the job, especially, if the material you are going to deal with contains dangerous material such as asbestos. Don’t try to do some jobs that you are unfamiliar with just to save some money. Any work that deals with asbestos such as asbestos testing in Adelaide (https://www.asbestoswatchadelaide.com.au/asbestos-testing-adelaide/) is not recommended to be performed by an unskilled individual.
Hiring a professional is strongly recommended although it will add some costs to the budget. A mishandled job will not only be much costly for a professional to fix, but it can also cost you to lose your life.